Open Search

EASA's private webinars

Displaying 11 - 20 of 49 private webinars available

Dealing with Shaft and Bearing Currents

This session will address key issues related to shaft and bearing currents in electric motors and generators. Critical topics that will be covered include recognizing symptoms of shaft and bearing currents, and determining if damaging current levels are present. Also, possible causes of the damaging current, such as machine dissymmetry and operation on variable frequency drives (VFDs) will be dealt with. Methods of testing to confirm the presence of shaft or bearing currents will be described, as well as how to assess the magnitude of the damaging currents. Further, solutions to eliminate or control shaft and bearing currents, such as insulators, isolators, and ceramic bearings, will be offered.

Who should attend

This seminar will be most useful for service center and field technicians with at least 5 years experience, service center managers, engineers, or anyone with previous experience dealing with shaft and bearing current issues looking to expand their knowledge.


Topic(s): Bearings, Root cause failure analysis, Shafts

Drilling Down Into DC Design

This one-hour webinar will focus on:

  • How to use basic design rules to verify data for fields, interpoles and armatures
  • Verifying the correct armature coil pitch
  • Special cases where you can improve on the original armature design
  • What to do when the armature was received stripped, and the manufacturer no longer exists

Topic(s): DC, Theory & design

Drop Testing of Fields and Synchronous Poles: Tips to Interpretation

This session will cover the basics of drop testing, as well as offer tips for interpreting the results. Both the AC and DC drop test methods will be described as well as the advantages and drawbacks for each. For those cases where the drop test results are out of tolerance, this material will guide the technician in determining the reason for the variation—how to recognize the difference between shorted coils and differences in iron, airgap or other influences. Rewind and assembly tips will also be discussed, where they influence the results of a drop test.

Who should attend

This seminar will be most useful for service center and field technicians with at least 5 years experience, service center managers, engineers, or anyone involved in DC motor or generator repair, as well as those who are simply looking to expand their knowledge.


Topic(s): DC, Testing

EASA Accreditation Program

It has been proven that electric motor efficiency can be maintained during repair and rewind by following defined good practices. EASA has developed an international accreditation program for service centers based on the sources of these good practices. The intent of this groundbreaking accreditation program is to evaluate service centers for evidence of compliance to assure that they are using prescribed good practices to maintain motor efficiency and reliability during electrical and mechanical repairs of electric motors. Repair processes that will be audited include rewinding, core testing, bearing replacement, bearing journal rebuilding, dynamic balancing; and electrical testing, mechanical measurements and calibration. This webinar session will provide insight into the EASA Accreditation Program and the third-party audit process that is an ancillary and key component of it.

Who should attend

This seminar will be most useful for service center supervisors and managers. The content will be beneficial for entry level supervisors through managers and owners.


Topic(s): AC, DC, Repair tips/procedures, Sales, Marketing & Management

Evaluating High No-Load Amps of Three-Phase Motors

Have you ever had to deal with a rewound motor that had high no-load amps? That is almost a rhetorical question as most of us have experienced this situation. The focus of this session will be on the steps to take before rewinding, to avoid the undesirable situation of high no-load motor amps after the rewind.

Our focus will be on the following steps that should be performed on every AC stator rewind:

  • Inspect the stator bore and rotor outside diameter for evidence of machining or damage
  • Record the original winding data exactly as found
  • Verify the winding data
  • Test the stator core before and after winding removal
Who should attend

This seminar will be most useful for service center mechanics and winders with any level of experience, and service center supervisors and managers.


Topic(s): AC, Theory & design

Final Testing for Pumps - An Overview

The pump repairs are completed! Now the pump needs to be tested. This webinar will discuss the procedures for the basic tests that can be performed on pumps that have been repaired in the service center.

Final testing of pumps can include:

  • Operational Tests
  • Seal Leakage Test
  • Motor Chamber Leakage test (submersibles)
  • Casing Pressure Test

While some of these tests are not difficult to perform, knowing the methods and limits will help service centers to confidently deliver quality pump repairs.


Topic(s): Pumps, Testing

Final Testing of DC Machines

To assure a quality repair, there are specific tests (such as neutral-setting and interpole-armature polarity) that should routinely be performed on every DC machine. When done correctly, the simple procedures presented in this session will prevent scenarios such as that late night phone call from an irate customer whose DC machine is “arcing like a fireworks show.”

Who should attend

Technicians with at least a moderate level of experience in DC machine repair will benefit from this session.


Topic(s): DC, Testing

Fundamentals of Shaft Alignment

Automatic alignment instruments are no substitute for understanding the underlying process of aligning direct coupled machines. This webinar will explain the simple calculations that govern the alignment process. That understanding will allow technicians to use any alignment tool more effectively, and deal with issues that confound the process.


Topic(s): Alignment, Shafts

Handling Partial Discharge Issues

This webinar will cover:

  • An explanation of partial discharge (PD)
  • Description of the damage mechanism
  • PWM drive and partial discharge
  • How to evaluate partial discharge
  • Repair tips for dealing with partial discharge

Topic(s): Repair tips/procedures, Root cause failure analysis

How to Balance Overhung Fans

Often an overhung fan is balanced in a single plane, only to find that the vibration has shifted to the outboard bearing. Attempts to use standard two plane techniques may result in calculated correction weights that are very large and produce poor results. There are more effective ways to approach this common problem. This webinar will present a methodical approach and techniques for tackling this difficult balancing problem.

Who should attend

This webinar is intended for field service balancing technicians, supervisors and managers.


Topic(s): Balancing, Mechanical

Pages