Open Search

EASA's private webinars

Displaying 41 - 49 of 49 private webinars available

Techniques for Straightening Pump Shafts

The slender dimensions of many pump shafts make them susceptible to distortion, which affects pump performance and reliability. This webinar will present a methodical approach and effective techniques for measuring and correcting shafts which are bent or twisted.

Who should attend

This webinar is intended for service center supervisors, managers and machine shop technicians.


Topic(s): Pumps, Shafts

The FFT (aka Spectrum): What It Is and Ways to Use It

This webinar will examine:

  • How the spectrum is generated from the vibration signal
  • The effect of f-max and resolution settings
  • Averaging techniques
  • Scaling and demodulation

Topic(s): Vibration

Time-Saving Repair Tips

This webinar shares secrets used by other service centers to gain a competitive edge in the repair process. Mechanical, winding and machining tips reduce repair time, help avoid unnecessary rework, and decrease turn-around time.

Who should attend

This webinar will be useful to supervisors, machinists, mechanics, winders, and sales personnel who interact with the end user.


Topic(s): AC, DC, Repair tips/procedures

Unusual Winding Connections & Layouts

Unusual winding connections can create real headaches if they aren’t correctly identified when the data is taken. And the time required to “get it right the second time” comes directly off your bottom line.

This webinar will cover:

  • equalized connections
  • odd grouping
  • interleaved and interspersed windings
  • part-salient, part-consequent connections

Topic(s): AC

Vertical Bearing Systems & Setting End Play

This session will look at various configurations of vertical motor thrust bearing arrangements. We will also discuss the reason for having or not having end play, what that end play should be and how to get there. Some pitfalls of setting end play such as internal bearing clearance, spring loaded bearings and back to back bearing sets will also be examined.

Who should attend

The webinar will be most useful for service center and field technicians, service center managers, and engineers involved in the disassembly and reassembly of vertical motors with thrust bearings.


Topic(s): Bearings, Repair tips/procedures

Vertical Turbine Pump Repair Tips

Vertical turbine pumps are used extensively in every segment of industry. Although they are not complex, repairing them in the service center can present a few challenges. This webinar will present some approaches and procedures that experience has shown will make the job easier.


Topic(s): Pumps, Repair tips/procedures

Vibration of Belt Driven Machines

This one-hour webinar will examine:

  • Identifying belt vibration
  • Identifying pulley pitch line run-out vibration
  • Other vibration sources
  • ODS analysis

Topic(s): Alignment, Mechanical, Vibration

Vibration Problems With Motors Installed on Vertical Pumps

When motors are installed on top of vertical pumps, high vibration is a common problem. The problem may be mechanical, hydraulic or structural. This webinar will provide an understanding of the nature of this style pump and the various forces essential to diagnosing and correcting vibration problems on vertical pump motors.


Topic(s): Pumps, Vibration

Winding & Bearing Temperature Sensing Devices

This webinar session will address the topic of a various temperature sensing devices including RTD’s, thermostats, thermocouples and thermistors. The advantages of each and the proper application will be covered.

Who should attend
This seminar will be most useful for service center sales personnel, engineers, supervisors and managers. The content will be beneficial for moderate through highly experienced persons.
Topic(s): AC, Bearings

Pages