Javascript is required to view this map.
Home

TAW Orlando Service Center, Inc.

Location

3400 Bartlett Blvd.
Orlando, FL, 32811
United States
Company Phone: 
407-423-1886
Company Fax: 
407-423-3017

www.tawinc.com

EASA Region: 
2
EASA Chapter: 
Southeastern Chapter
Join Date: 
July 25, 1989
Employees
Key contacts at this member company: 
  1. James A. Turner, III
Total number of employees: 
48
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Single-phase motors
  • Polyphase motors less than 50 hp (37 kW)
  • POLYPHASE MOTORS UP TO 200 HP (150 kW)
  • POLYPHASE MOTORS 200 HP (150 kW) AND OVER
  • Polyphase motors with formed coils
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC generator rewinding less than 50 kW
  • AC generator rewinding 50 kW and over
  • Brush shifting motors
  • U.L. or CSA approved for rebuilding of electric motors and generators in hazardous locations

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding

Specialty machine rewinding or rebuilding

  • TRACTION
  • HERMETIC

Transformer servicing

  • Air-cooled rebuilding
  • Air-cooled rewinding

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Metal spraying
  • Pump repairing
  • Rotor rebarring
  • Air compressors

Electric/electronic control servicing

  • Electromechanical field servicing
  • Switchgear 600 volts

Field service

  • Vibration analysis
  • Alignment
  • Laser alignment
  • Portable balancing
  • Thermography

Load testing (Dynamometer ranges)

  • 125 to 250 hp (93 to 186 kW) @ 1800 rpm

Electrical apparatus sales

  • Single-phase electric motors
  • POLYPHASE ELECTRIC MOTORS
  • DC motors
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Power transmission equipment
  • Generators
  • Hoists
  • Electric motor controls
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Vacuum-pressure impregnation equipment (VPI) : Diameter: 6 - 7.99 ft (1.827 - 2.435 m)
  • Vacuum-pressure impregnation equipment (VPI) : Resin: Polyester
  • Dipping equipment : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Burnout oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
  • Lathe equipment : 48 in (121 cm) or more
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 10 tons (9,072 kg) or over
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 15,000 - 49,999 sq. ft (1,394 - 4,645 sq. m)
This entry last updated in EASA database: 
November 15, 2011