Cape Armature Winders Pty., Ltd.

Location

64 Killarney Ave., Killarney Gardens
Cape Town, Western Cape, 7441
South Africa
Company Phone: 
27-21-5561488
Company Fax: 
27-21-5560839

www.capearm.co.za

george@capearm.co.za

EASA Region: 
9
EASA Chapter: 
European and World Chapter
Join Date: 
January 11, 2008
Employees
Key contacts at this member company: 
  1. George G. Epenetos
Total number of employees: 
50
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES

AC electric motor rewinding and rebuilding

  • Polyphase motors less than 50 hp (37 kW)
  • Polyphase motors up to 200 hp (150 kW)
  • POLYPHASE MOTORS 200 HP (150 kW) AND OVER
  • Polyphase motors with formed coils
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC generator rewinding less than 50 kW
  • AC generator rewinding 50 kW and over
  • Brush shifting motors
  • Hazardous Area Equipment Rebuilding

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC MOTORS OR GENERATORS 10 kW AND OVER
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding
  • DC welders - rotating
  • DC welders - static

Specialty machine rewinding or rebuilding

  • TRACTION
  • Hoist
  • DC lifting magnets

Transformer servicing

  • Air-cooled rebuilding
  • Air-cooled rewinding
  • Oil-filled rebuilding
  • Oil-filled rewinding
  • Welder transformer rewinding
  • Auto transformer rewinding

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Pump repairing
  • Rotor rebarring
  • Air compressors

Electric/electronic control servicing

  • Electromechanical field servicing
  • Electronic field servicing
  • General electrical contracting

Field service

  • VIBRATION ANALYSIS
  • Alignment
  • Laser alignment

Load testing (Dynamometer ranges)

  • 251 to 500 hp (187 to 373 kW) @ 1800 rpm

Electrical apparatus sales

  • POLYPHASE ELECTRIC MOTORS

SERVICE CENTER FACILITIES

  • Bake oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Vacuum-pressure impregnation equipment (VPI) : Diameter: 8 - 9.99 ft (2.436 - 3.045 m)
  • Vacuum-pressure impregnation equipment (VPI) : Resin: Polyester
  • Vacuum-pressure impregnation equipment (VPI) : Resin: Epoxy
  • Dipping equipment : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Burnout oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dynamic balancing equipment : 2,000 - 4,999 lbs (907 - 2,267 kg)
  • Lathe equipment : 36 - 47 in (91- 120 cm)
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 10 tons (9,072 kg) or over
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 15,000 - 49,999 sq. ft (1,394 - 4,645 sq. m)
This entry last updated in EASA database: 
October 3, 2011