Javascript is required to view this map.
Home

D.M.S. Electric Apparatus Service, Inc.

Location

630 Gibson St.
Kalamazoo, MI, 49007
United States
Company Phone: 
269-349-7000
Company Fax: 
269-349-9346

www.dmsquality.com

EASA Region: 
3
EASA Chapter: 
Western Michigan Chapter
Join Date: 
August 30, 1971
Employees
Key contacts at this member company: 
  1. Tim Fielding
Total number of employees: 
35
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Single-phase motors
  • Polyphase motors less than 50 hp (37 kW)
  • Polyphase motors up to 200 hp (150 kW)
  • Polyphase motors 200 hp (150 kW) and over
  • Polyphase motors with formed coils
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC generator rewinding less than 50 kW
  • AC generator rewinding 50 kW and over
  • Brush shifting motors
  • U.L. or CSA approved for rebuilding of electric motors and generators in hazardous locations
  • ISO 9000 Series registration.

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding
  • DC welders - rotating
  • DC welders - static

Specialty machine rewinding or rebuilding

  • Traction
  • Hermetic
  • Hoist
  • DC lifting magnets

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Metal spraying
  • Rotor rebarring

Electric/electronic control servicing

  • Electromechanical field servicing

Field service

  • Vibration analysis
  • Alignment
  • Laser alignment
  • Thermography

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • DC motors
  • Transformers
  • Gear motors, speed reducers
SERVICE CENTER FACILITIES: 
  • Vacuum-pressure impregnation equipment (VPI) : Diameter: 10 ft (3.046 m) and larger
  • Vacuum-pressure impregnation equipment (VPI) : Resin: Epoxy
  • Dipping equipment : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Burnout oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
  • Lathe equipment : 48 in (121 cm) or more
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 10 tons (9,072 kg) or over
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 50,000 sq. ft (4,646 sq. m) and over
  • Bake oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
This entry last updated in EASA database: 
September 28, 2011