Javascript is required to view this map.
Home

All American Technical Team, Inc.

Location

3515 La Plata Hwy.
Farmington, NM, 87401
United States
Company Phone: 
505-326-1778
Company Fax: 
505-326-4899

www.allamericantechnicalteam.com

jimlain@allamericantechnicalteam.com

EASA Region: 
5
EASA Chapter: 
Rocky Mountain Chapter
Join Date: 
May 6, 2009
Employees
Key contacts at this member company: 
  1. Jim Lain
  2. Bobby Bolin
Total number of employees: 
35
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Polyphase motors less than 50 hp (37 kW)
  • POLYPHASE MOTORS UP TO 200 HP (150 kW)
  • Polyphase motors with formed coils
  • POLYPHASE MOTORS OVER 600 VOLTS
  • U.L. or CSA approved for rebuilding of electric motors and generators in hazardous locations

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC MOTORS OR GENERATORS 10 kW AND OVER
  • Rotating fields less than 10 kW
  • Armature rewinding

Specialty machine rewinding or rebuilding

  • TRACTION
  • Hoist

Transformer servicing

  • Air-cooled rewinding

Mechanical servicing

  • Dynamic balancing
  • GENERAL MACHINE SHOP
  • Metal spraying
  • Pump repairing
  • Rotor rebarring
  • Air compressors
  • Combustion engines

Electric/electronic control servicing

  • Electromechanical field servicing
  • General electrical contracting

Field service

  • Vibration analysis
  • Alignment
  • Laser alignment
  • Thermography

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • Adjustable-speed drives
  • Electric motor controls
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Dipping equipment : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Burnout oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
  • Lathe equipment : 48 in (121 cm) or more
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 10 tons (9,072 kg) or over
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 15,000 - 49,999 sq. ft (1,394 - 4,645 sq. m)
This entry last updated in EASA database: 
September 3, 2010