Javascript is required to view this map.
Home

E-Z Electric Motor Service, Inc.

Location

23440 Miles Rd.
Bedford Heights, OH, 44128
United States
Company Phone: 
216-581-8820
Company Fax: 
216-581-8618

www.ezelectricmotor.com

demetrius@ezelectricmotor.com

EASA Region: 
3
EASA Chapter: 
Greater Cleveland Chapter
Join Date: 
August 25, 1967
Employees
Key contacts at this member company: 
  1. Demetrius Ledgyard
Total number of employees: 
17
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Polyphase motors less than 50 hp (37 kW)
  • Polyphase motors up to 200 hp (150 kW)
  • Polyphase motors 200 hp (150 kW) and over
  • Polyphase motors with formed coils
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC generator rewinding less than 50 kW
  • AC generator rewinding 50 kW and over
  • Brush shifting motors

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding
  • DC welders - rotating

Specialty machine rewinding or rebuilding

  • Traction
  • Hermetic
  • DC lifting magnets

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Metal spraying
  • Pump repairing
  • Rotor rebarring

Field service

  • Vibration analysis
  • Alignment
  • Laser alignment
  • Portable balancing

Load testing (Dynamometer ranges)

  • 251 to 500 hp (187 to 373 kW) @ 1800 rpm
  • Over 500 hp (373 kW) @ 1800 rpm

Electrical apparatus sales

  • Polyphase electric motors
  • DC motors
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Power transmission equipment
  • Generators
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Vacuum-pressure impregnation equipment (VPI) : Diameter: 6 - 7.99 ft (1.827 - 2.435 m)
  • Vacuum-pressure impregnation equipment (VPI) : Resin: Polyester
  • Dipping equipment : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Burnout oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
  • Lathe equipment : 48 in (121 cm) or more
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 10 tons (9,072 kg) or over
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 15,000 - 49,999 sq. ft (1,394 - 4,645 sq. m)
This entry last updated in EASA database: 
September 30, 2011