City Machine Technologies, Inc.

Location

825 M. L. King Blvd.
Youngstown, OH, 44502
United States
Company Phone: 
330-747-2639
Company Fax: 
330-747-3205
Number of employees: 
50
EASA Region: 
3
EASA Chapter: 
Tri-State Chapter
Join Date: 
March 21, 1988
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Polyphase motors less than 50 hp (37 kW)
  • Polyphase motors up to 200 hp (150 kW)
  • POLYPHASE MOTORS 200 HP (150 kW) AND OVER
  • POLYPHASE MOTORS WITH FORMED COILS
  • POLYPHASE MOTORS OVER 600 VOLTS
  • WOUND ROTORS
  • AC generator rewinding less than 50 kW
  • AC GENERATOR REWINDING 50 kW AND OVER
  • U.L. or CSA approved for rebuilding of electric motors and generators in hazardous locations
  • ISO 9000 Series registration.

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding

Specialty machine rewinding or rebuilding

  • Traction
  • Hermetic
  • Hoist
  • DC lifting magnets

Transformer servicing

  • Air-cooled rebuilding
  • Auto transformer rewinding

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Metal spraying
  • Pump repairing
  • Rotor rebarring

Electric/electronic control servicing

  • Electromechanical field servicing

Field service

  • Vibration analysis
  • Alignment
  • Laser alignment
  • Portable balancing
  • Thermography

Load testing (Dynamometer ranges)

  • Over 500 hp (373 kW) @ 1800 rpm

Electrical apparatus sales

  • Polyphase electric motors
  • DC motors
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Vacuum-pressure impregnation equipment (VPI) : Diameter: 3 - 5.99 ft (0.914 - 1.826 m)
  • Vacuum-pressure impregnation equipment (VPI) : Resin: Epoxy
  • Dipping equipment : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Burnout oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
  • Lathe equipment : 48 in (121 cm) or more
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 10 tons (9,072 kg) or over
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 50,000 sq. ft (4,646 sq. m) and over
This entry last updated in EASA database: 
August 27, 2010