Javascript is required to view this map.
Home

Dumbaugh Electric Motors

Location

690 E. Butler Rd.
Butler, PA, 16002
United States
Company Phone: 
724-287-1719
Company Fax: 
724-287-6221

info@demotors.com

EASA Region: 
1
EASA Chapter: 
Tri-State Chapter
Join Date: 
February 2, 1951
Employees
Key contacts at this member company: 
  1. Scott Barton
Total number of employees: 
12
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Single-phase motors
  • Polyphase motors less than 50 hp (37 kW)
  • Polyphase motors up to 200 hp (150 kW)
  • POLYPHASE MOTORS 200 HP (150 kW) AND OVER
  • POLYPHASE MOTORS WITH FORMED COILS
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC GENERATOR REWINDING 50 kW AND OVER
  • U.L. or CSA approved for rebuilding of electric motors and generators in hazardous locations

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding
  • DC welders - rotating
  • DC welders - static

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Metal spraying
  • Pump repairing

Electric/electronic control servicing

  • Custom panel fabrication
  • General electrical contracting

Field service

  • Alignment

Load testing (Dynamometer ranges)

  • Under 125 hp (93 kW) @ 1800 rpm

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • DC motors
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Power transmission equipment
  • Generators
  • Hoists
  • Electric motor controls
  • Portable tools
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dipping equipment : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Burnout oven : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Dynamic balancing equipment : 2,000 - 4,999 lbs (907 - 2,267 kg)
  • Lathe equipment : 16 - 23 in (41 - 60 cm)
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 5 - 9.9 tons (4,536 - 9,071 kg)
  • Area regularly serviced (radius from plant) : 50 - 99 miles (80 - 160 km)
  • Area devoted to service work : 2,000 - 4,999 sq. ft (187 - 464 sq. m)
This entry last updated in EASA database: 
September 20, 2011