Javascript is required to view this map.
Home

Alberta Rewind & Pump Services, Ltd.

Location

8435 Mcintyre Rd.
Edmonton, AB, T6E 6G3
Canada
Company Phone: 
780-468-7175
Company Fax: 
780-468-7177
EASA Region: 
8
EASA Chapter: 
Western Canada Chapter
Join Date: 
July 17, 1989
Employees
Key contacts at this member company: 
  1. Tony Scheffer, Sr.
  2. Steve Paddon
Total number of employees: 
15
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • SINGLE-PHASE MOTORS
  • Polyphase motors less than 50 hp (37 kW)
  • POLYPHASE MOTORS UP TO 200 HP (150 kW)
  • POLYPHASE MOTORS 200 HP (150 kW) AND OVER
  • POLYPHASE MOTORS WITH FORMED COILS
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC generator rewinding less than 50 kW
  • AC GENERATOR REWINDING 50 kW AND OVER
  • Brush shifting motors

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Metal spraying
  • Pump repairing

Electric/electronic control servicing

  • Electromechanical field servicing

Field service

  • Vibration analysis
  • Alignment
  • Laser alignment
  • Portable balancing

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • DC motors
  • Transformers
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Generators
  • Electric motor controls
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Vacuum-pressure impregnation equipment (VPI) : Diameter: 3 - 5.99 ft (0.914 - 1.826 m)
  • Dipping equipment : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Burnout oven : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Dynamic balancing equipment : 2,000 - 4,999 lbs (907 - 2,267 kg)
  • Lathe equipment : 24 - 35 in (61 - 90 cm)
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 10 tons (9,072 kg) or over
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 15,000 - 49,999 sq. ft (1,394 - 4,645 sq. m)
This entry last updated in EASA database: 
September 7, 2010