A.C. Motor Electric, Ltd.

Location

259 Okanagan Ave., E.

Penticton, BC, V2A 3J8

Canada

Company Phone:

250-493-1440

Company Fax:

250-493-4531

www.acmotorelectric.com

frank@acmotorelectric.com

EASA Region:

EASA Chapter:

Western Canada Chapter

Join Date:

March 17, 1979

Employees

Key contacts at this member company:

Total number of employees:

Business activities and facilities

This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES:

AC electric motor rewinding and rebuilding

Single-phase motors
Polyphase motors less than 50 hp (37 kW)
POLYPHASE MOTORS UP TO 200 HP (150 kW)
POLYPHASE MOTORS 200 HP (150 kW) AND OVER
Polyphase motors with formed coils
Polyphase motors over 600 volts
Wound rotors
AC generator rewinding less than 50 kW
AC generator rewinding 50 kW and over
Brush shifting motors

DC motor or generator rewinding or rebuilding

DC motors or generators less than 10 kW
DC motors or generators 10 kW and over
Rotating fields less than 10 kW
Rotating fields 10 kW and over
Armature rewinding
DC welders - rotating
DC welders - static

Specialty machine rewinding or rebuilding

Hoist
DC lifting magnets

Transformer servicing

Air-cooled rebuilding
Air-cooled rewinding

Mechanical servicing

DYNAMIC BALANCING
PUMP REPAIRING
Air compressors
Combustion engines

Electric/electronic control servicing

Electromechanical field servicing
Switchgear 600 volts

Field service

Vibration analysis
Alignment
Portable balancing

Electrical apparatus sales

Single-phase electric motors
POLYPHASE ELECTRIC MOTORS
DC motors
Transformers
Gear motors, speed reducers
Adjustable-speed drives
Power transmission equipment
Generators
Hoists
Electric motor controls
Portable tools
Pumps

SERVICE CENTER FACILITIES:

Bake oven : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
Dipping equipment : Less than 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
Burnout oven : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
Dynamic balancing equipment : Portable
Lathe equipment : Less than 16 in (40 cm)
Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
Largest crane or hoist capacity : 2 - 4.9 tons (1,816 - 4,535 kg)
Area regularly serviced (radius from plant) : 50 - 99 miles (80 - 160 km)
Area devoted to service work : 2,000 - 4,999 sq. ft (187 - 464 sq. m)

This entry last updated in EASA database:

September 30, 2011