Javascript is required to view this map.
Home

Accu Electric Motors, Inc.

Location

2900 Portland Dr.
Oakville, ON, L6H 5W8
Canada
Company Phone: 
905-829-2505
Company Fax: 
905-829-4416

www.servo-repair.com

gbajwa@accuelectric.com

EASA Region: 
8
EASA Chapter: 
Ontario Chapter
Join Date: 
July 27, 1999
Employees
Key contacts at this member company: 
  1. Gurcharan Bajwa
  2. Damon Preet Bajwa
  3. Herprit S. Bajwa
Total number of employees: 
42
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Polyphase motors less than 50 hp (37 kW)
  • Polyphase motors 200 hp (150 kW) and over
  • Polyphase motors with formed coils
  • AC generator rewinding 50 kW and over
  • Brush shifting motors
  • ISO 9000 Series registration.

DC motor or generator rewinding or rebuilding

  • Rotating fields 10 kW and over
  • Armature rewinding

Specialty machine rewinding or rebuilding

  • SERVO
  • Traction
  • Hermetic
  • Hoist
  • DC lifting magnets

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Pump repairing
  • Rotor rebarring

Electric/electronic control servicing

  • Electromechanical field servicing
  • ELECTRONIC FIELD SERVICING
  • PRINTED CIRCUIT BOARD REPAIRING
  • Switchgear over 600 volts

Field service

  • Vibration analysis
  • THERMOGRAPHY

Load testing (Dynamometer ranges)

  • 125 to 250 hp (93 to 186 kW) @ 1800 rpm

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • DC motors
  • Transformers
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Power transmission equipment
  • Generators
  • Hoists
  • Electric motor controls
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dipping equipment : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Burnout oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dynamic balancing equipment : 2,000 - 4,999 lbs (907 - 2,267 kg)
  • Lathe equipment : 24 - 35 in (61 - 90 cm)
  • Height and width of largest service center entrance : At least 8 x 12 ft (2.4 x 3.6 m)
  • Largest crane or hoist capacity : 2 - 4.9 tons (1,816 - 4,535 kg)
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 10,000 - 14,999 sq. ft (930 - 1,393 sq. m)
This entry last updated in EASA database: 
October 24, 2011