Javascript is required to view this map.
Home

Elec-Trek Motor Repair

Location

160 Shannon St.
Montreal, QC, H3C 2J2
Canada
Company Phone: 
514-861-0936
Company Fax: 
514-879-0634

electrek@hotmail.com

EASA Region: 
8
EASA Chapter: 
Quebec & Maritimes Chapter
Join Date: 
June 25, 1982
Employees
Key contacts at this member company: 
  1. Julian Zanca
Total number of employees: 
8
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Single-phase motors
  • POLYPHASE MOTORS LESS THAN 50 HP (37 kW)
  • POLYPHASE MOTORS UP TO 200 HP (150 kW)
  • POLYPHASE MOTORS 200 HP (150 kW) AND OVER
  • Polyphase motors with formed coils
  • AC generator rewinding less than 50 kW
  • AC generator rewinding 50 kW and over
  • Brush shifting motors

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC MOTORS OR GENERATORS 10 kW AND OVER
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding
  • DC welders - rotating
  • DC welders - static

Specialty machine rewinding or rebuilding

  • Hermetic
  • Hoist

Transformer servicing

  • Air-cooled rebuilding
  • Air-cooled rewinding
  • Welder transformer rewinding

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Metal spraying
  • Pump repairing
  • Air compressors

Electric/electronic control servicing

  • Electromechanical field servicing

Field service

  • Vibration analysis
  • Alignment

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • DC motors
  • Transformers
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Power transmission equipment
  • Generators
  • Hoists
  • Portable tools
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Dipping equipment : Less than 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Burnout oven : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Dynamic balancing equipment : 500 - 1,999 lbs (228 - 906 kg)
  • Lathe equipment : 24 - 35 in (61 - 90 cm)
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 2 - 4.9 tons (1,816 - 4,535 kg)
  • Area regularly serviced (radius from plant) : Less than 50 miles (80 km)
  • Area devoted to service work : 5,000 - 9,999 sq. ft (465 - 929 sq. m)
This entry last updated in EASA database: 
October 19, 2011