Home

Hawkes Bay Electric Motor Rewinders (1986), Ltd.

Location

37 Austin St., Onekawa
Napier, Hawkes Bay, 4142
New Zealand
Company Phone: 
64-6-8439284
Company Fax: 
64-6-8439476

info@hbemr.co.nz

EASA Region: 
10
EASA Chapter: 
New Zealand Chapter
Join Date: 
June 30, 1987
Employees
Key contacts at this member company: 
  1. Bruce Broun
Total number of employees: 
6
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • SINGLE-PHASE MOTORS
  • POLYPHASE MOTORS LESS THAN 50 HP (37 kW)
  • POLYPHASE MOTORS UP TO 200 HP (150 kW)
  • Polyphase motors 200 hp (150 kW) and over
  • Polyphase motors with formed coils
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC generator rewinding less than 50 kW
  • AC generator rewinding 50 kW and over

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Armature rewinding
  • DC welders - rotating
  • DC welders - static

Specialty machine rewinding or rebuilding

  • Servo
  • Traction
  • Hermetic
  • Hoist
  • DC lifting magnets

Transformer servicing

  • Air-cooled rebuilding
  • Air-cooled rewinding
  • Oil-filled rebuilding
  • Oil-filled rewinding
  • Welder transformer rewinding
  • Auto transformer rewinding

Mechanical servicing

  • Pump repairing
  • Rotor rebarring

Electric/electronic control servicing

  • Electromechanical field servicing
  • Printed circuit board repairing
  • Switchgear 600 volts
  • General electrical contracting

Field service

  • Vibration analysis
  • Thermography

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • DC motors
  • Transformers
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Generators
  • Hoists
  • Electric motor controls
  • Portable tools
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 4 x 4 x 4 ft (1.2 x 1.2 x 1.2 m)
  • Lathe equipment : 36 - 47 in (91- 120 cm)
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 2 - 4.9 tons (1,816 - 4,535 kg)
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 5,000 - 9,999 sq. ft (465 - 929 sq. m)
This entry last updated in EASA database: 
October 3, 2011