Javascript is required to view this map.
Home

All Safe Electric, Inc.

Location

7057 Canoga Ave.
Canoga Park, CA, 91303
United States
Company Phone: 
818-340-0974
Company Fax: 
818-340-5553

www.allsafeelectric.com

sales@allsafeelectric.com

Key contacts at this member company
Manny Ballaret
Number of employees: 
6
EASA Region: 
7
EASA Chapter: 
Southern California Chapter
Join Date: 
January 2, 1969
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Single-phase motors
  • POLYPHASE MOTORS LESS THAN 50 HP (37 kW)
  • POLYPHASE MOTORS UP TO 200 HP (150 kW)
  • Polyphase motors 200 hp (150 kW) and over
  • Polyphase motors with formed coils
  • Polyphase motors over 600 volts
  • AC generator rewinding 50 kW and over

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding

Mechanical servicing

  • Dynamic balancing
  • General machine shop
  • Metal spraying
  • PUMP REPAIRING

Electric/electronic control servicing

  • ELECTROMECHANICAL FIELD SERVICING
  • GENERAL ELECTRICAL CONTRACTING

Field service

  • Vibration analysis
  • Alignment

Load testing (Dynamometer ranges)

  • Under 125 hp (93 kW) @ 1800 rpm
  • 125 to 250 hp (93 to 186 kW) @ 1800 rpm
  • 251 to 500 hp (187 to 373 kW) @ 1800 rpm

Electrical apparatus sales

  • Single-phase electric motors
  • Polyphase electric motors
  • DC motors
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Generators
  • Electric motor controls
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dipping equipment : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Burnout oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dynamic balancing equipment : 500 - 1,999 lbs (228 - 906 kg)
  • Lathe equipment : 36 - 47 in (91- 120 cm)
  • Height and width of largest service center entrance : At least 8 x 12 ft (2.4 x 3.6 m)
  • Largest crane or hoist capacity : 2 - 4.9 tons (1,816 - 4,535 kg)
  • Area regularly serviced (radius from plant) : 50 - 99 miles (80 - 160 km)
  • Area devoted to service work : 5,000 - 9,999 sq. ft (465 - 929 sq. m)
This entry last updated in EASA database: 
November 11, 2009