Javascript is required to view this map.
Home

Denver Electric Motor Sales & Service, Inc.

Location

1300 E. 58th Ave.
Denver, CO, 80216
United States
Company Phone: 
303-292-9133
Company Fax: 
303-297-1707
Key contacts at this member company
Dale Skeen
Number of employees: 
7
EASA Region: 
5
EASA Chapter: 
Rocky Mountain Chapter
Join Date: 
September 15, 1975
Business activities and facilities
This listing describes the business activities and facilities of Active member firms that have provided this information. Business activities that are "CAPITALIZED" represent areas this member specializes in.

BUSINESS ACTIVITIES: 

AC electric motor rewinding and rebuilding

  • Single-phase motors
  • Polyphase motors less than 50 hp (37 kW)
  • POLYPHASE MOTORS UP TO 200 HP (150 kW)
  • POLYPHASE MOTORS 200 HP (150 kW) AND OVER
  • POLYPHASE MOTORS WITH FORMED COILS
  • Polyphase motors over 600 volts
  • Wound rotors
  • AC generator rewinding less than 50 kW
  • AC generator rewinding 50 kW and over

DC motor or generator rewinding or rebuilding

  • DC motors or generators less than 10 kW
  • DC motors or generators 10 kW and over
  • Rotating fields less than 10 kW
  • Rotating fields 10 kW and over
  • Armature rewinding
  • DC welders - rotating
  • DC welders - static

Specialty machine rewinding or rebuilding

  • Traction
  • Hermetic
  • Hoist

Mechanical servicing

  • DYNAMIC BALANCING
  • General machine shop
  • Metal spraying
  • Pump repairing
  • Rotor rebarring

Electric/electronic control servicing

  • Electromechanical field servicing

Field service

  • Alignment
  • Laser alignment
  • Portable balancing

Electrical apparatus sales

  • Single-phase electric motors
  • POLYPHASE ELECTRIC MOTORS
  • DC motors
  • Transformers
  • Gear motors, speed reducers
  • Adjustable-speed drives
  • Power transmission equipment
  • Pumps
SERVICE CENTER FACILITIES: 
  • Bake oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)
  • Dipping equipment : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Burnout oven : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
  • Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
  • Dynamic balancing equipment : Portable
  • Lathe equipment : 16 - 23 in (41 - 60 cm)
  • Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
  • Largest crane or hoist capacity : 5 - 9.9 tons (4,536 - 9,071 kg)
  • Area regularly serviced (radius from plant) : 200 miles (321 km) or over
  • Area devoted to service work : 15,000 - 49,999 sq. ft (1,394 - 4,645 sq. m)
This entry last updated in EASA database: 
September 29, 2009