Open Search

Resource library

Displaying 1 - 20 of 724

EASA Technical Manual

Published: August 2016
Technical subject(s): AC motors, DC motors, Design/theory/application, Drives/controls, Frame, Lubrication, Miscellaneous, Nameplates, Repair procedures and tips, Safety, Servo motors, Shafts, Testing, Transformers, Ventilation/cooling, Vibration, Wire

EASA AR100-2015: Práctica Recomendada para la Reparación de Máquinas Eléctricas Rotativas

Published: September 2015
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Stators/windings

ANSI/EASA Standard AR100-2015: Recommended Practice for the Repair of Rotating Electrical Apparatus

Published: August 2015
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Stators/windings
CLICK HERE TO PURCHASE

EASA Technical Manual (Deutsche)

Published: November 2012
Technical subject(s): AC motors, DC motors, Design/theory/application, Drives/controls, Frame, Lubrication, Miscellaneous, Nameplates, Repair procedures and tips, Safety, Servo motors, Shafts, Testing, Transformers, Ventilation/cooling, Vibration, Wire

The Effect of Repair/Rewinding on Motor Efficiency: EASA/AEMT Rewind Study and Good Practice Guide to Maintain Motor Efficiency

Published: December 2003
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Service center equipment
CLICK HERE TO PURCHASE

Aprovechando al máximo la prueba de factor de potencia tip-up

Published: April 2017
Author: Chase Fell, Precision Coil and Rotor
Technical subject(s): AC motors, Alternators/generators, Motor testing, Winding insulation

Getting the most from power factor tip-up testing

Published: April 2017
Author: Chase Fell, Precision Coil and Rotor
Technical subject(s): AC motors, Alternators/generators, Motor testing, Winding insulation

Información necesaria para completar la solicitud de verificación de datos & rediseño

Published: April 2017
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application, Repair procedures and tips, Stators/windings, Winding connections

Information that's needed to complete a data verification & redesign request

Published: April 2017
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application, Repair procedures and tips, Winding connections

Stator Core Testing: Know What You Have Before You Wind It

Published: April 2017
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): Form wound, Motor testing, Stators/windings, Testing
CLICK HERE TO PURCHASE

Tech Tip: Novel method for packing a bearing with grease

Published: April 2017
Author: Bret McCormick, Stewart’s Electric Motor Works, Inc., Orlando, Florida, Technical Education Committee Member
Technical subject(s): Bearings, Grease lubrication, Lubrication

Consider this aluminum frame motor burnout method

Published: March 2017
Author: Jacob Snyder, Evans Enterprises, Inc., Tulsa, OK.
Technical subject(s): Repair procedures and tips, Service center equipment

Considere este método para quemar un motor con carcasa de aluminio

Published: March 2017
Author: Jacob Snyder, Evans Enterprises, Inc., Tulsa, OK.
Technical subject(s): Repair procedures and tips, Service center equipment

Projectos simplificados por una mejor comprensión de los ratios y proporciones

Published: March 2017
Author: Gene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Miscellaneous

Projects simplified with better understanding of ratios and proportions

Published: March 2017
Author: Gene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Miscellaneous

Safety Tips: Remember these general rules

Published: March 2017
Technical subject(s): Miscellaneous, Safety

Speed/Torque Curves

Published: March 2017
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 56 Minutes
Technical subject(s): Troubleshooting & failure analysis
CLICK HERE TO PURCHASE

Tech Tip: When restacking, use real coreplate

Published: March 2017
Technical subject(s): Repair procedures and tips

DC Theory and Design 101

Published: February 2017
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 60 Minutes
Technical subject(s): DC motors, Design/theory/application
CLICK HERE TO PURCHASE

Getting the most from your call to EASA Technical Support

Published: February 2017
Author: Mike Parsons, Hupp Electric Motors Co., Marion, Iowa, Technical Education Committee Member
Technical subject(s): Miscellaneous, Repair procedures and tips

Pages