Open Search

Resource library

Displaying 251 - 300 of 761

Management Pulse survey results: Replacing management personnel

Published: August 2014
Author: Charles Bailey, EASA Management Services Committee
Technical subject(s): N/A

Time-Saving Repair Tips

Published: August 2014
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 59 minutes
Technical subject(s): Miscellaneous, Repair procedures and tips, Service center equipment
CLICK HERE TO PURCHASE

Armature winding designs demystified with helpful tips

Published: July 2014
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Armatures, Design/theory/application

Winding insulation when room is limited

Published: July 2014
Technical subject(s): Winding insulation

Considerations for insulated bearings

Published: June 2014
Technical subject(s): Bearings, Repair procedures and tips

Ensuring Success with VPI

Published: June 2014
Author: Mike Howell, EASA Technical Support Specialist
Recording duration: 63 minutes
Technical subject(s): Repair procedures and tips, Stators/windings, Winding insulation
CLICK HERE TO PURCHASE

Environmental audit questionnaire

Published: June 2014
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety, Service center equipment

Exclusive Industry Research

Published: June 2014
Author: CFE Media
Technical subject(s): N/A

Important considerations for on-site stator rewinds

Published: June 2014
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): AC motors, Stators/windings

Management Pulse survey results: Return to Work programs and procedures

Published: June 2014
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): N/A

Revised Energy Conservation Standards for Commercial and Industrial Electric Motors released by U.S. DOE

Published: June 2014
Author: Rob Boteler, Chair, NEMA Energy Management Committee, Nidec Government Affairs
Technical subject(s): N/A

Safety and health audit questionnaire

Published: June 2014
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety

Safety with mobile equipment

Published: June 2014
Technical subject(s): Safety, Service center equipment

The importance of stator core loss testing before and after burn-off process

Published: June 2014
Author: Steve Skenzick, HPS Electrical Apparatus Sales & Service
Technical subject(s): AC motors, Case studies, Laminations, Motor testing, Repair procedures and tips, Service center equipment, Stators/windings

Properly evaluating shunt field amps versus ohms

Published: May 2014
Technical subject(s): Alternators/generators, DC motors, Design/theory/application, Field coils

Safe starting of motors: Pay attention to temperature increase

Published: May 2014
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application

Safety with portable grinders

Published: May 2014
Technical subject(s): Safety, Service center equipment

Special sensors detect mixture of water and oil in pumps

Published: May 2014
Author: Bret McCormick, Stewart's Electric Motor Works, Inc.
Technical subject(s): Miscellaneous, Pumps

Winding & Bearing Temperature Sensing Devices

Published: May 2014
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 56 minutes
Technical subject(s): AC motors, Bearings, Stators/windings, Temperature detectors
CLICK HERE TO PURCHASE

Choosing between "component" and "cartridge" mechanical seals

Published: April 2014
Author: Gene Vogel, EASA Pump & Vibration Specialist
Technical subject(s): Design/theory/application, Pump seals, Pumps

Core Repair and Restack Techniques

Published: April 2014
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 63 minutes
Technical subject(s): Repair procedures and tips, Stators/windings
CLICK HERE TO PURCHASE

Management Pulse survey results: Accounting Information Systems

Published: April 2014
Author: Steve Rossiter, Energy Management Corp.
Technical subject(s): N/A

Potting submersible pump cables

Published: April 2014
Technical subject(s): Pumps, Repair procedures and tips

Pump Selection (3-Part Series)

Published: April 2014
Author: Gene Vogel, EASA Pump & Vibration Specialist
Recording duration: 2 hours 44 minutes
Technical subject(s): Design/theory/application, Pumps
CLICK HERE TO PURCHASE

Some general rules for safety

Published: April 2014
Technical subject(s): Safety

Transformer basics: How they operate, their many features

Published: April 2014
Author: Richard Huber, P. Eng., Richard Huber Engineering, Ltd.
Technical subject(s): Design/theory/application, Transformers

Make sure design is “Suitable for Use”

Published: March 2014
Technical subject(s): Design/theory/application

Motor Starting Capabilities and Considerations

Published: March 2014
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Recording duration: 59 minutes
Technical subject(s): AC motors, Design/theory/application
CLICK HERE TO PURCHASE

The importance of calibration in the service center

Published: March 2014
Author: Pat Douglas, Kirby Risk-Mechanical Solutions and Service
Technical subject(s): Service center equipment

Thermistors: What they are and how they work

Published: March 2014
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): Miscellaneous, Stators/windings, Temperature detectors

When life depends on it, make sure the machine really is "off"

Published: March 2014
Author: Lenwood Ireland, Ireland Electric Co.
Technical subject(s): Safety

AC Motor Redesign

Published: February 2014
Technical subject(s): AC motors, Design/theory/application, Stators/windings, Winding connections

Minimizing Risk with High Voltage Rewinds

Published: February 2014
Author: Mike Howell, EASA Technical Support Specialist
Recording duration: 53 minutes
Technical subject(s): AC motors, Design/theory/application, Repair procedures and tips, Stators/windings
CLICK HERE TO PURCHASE

Rediseño de Motores AC

Published: February 2014
Technical subject(s): AC motors, Design/theory/application, Stators/windings, Winding connections

Taking data: How to correctly identify the connection

Published: February 2014
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application, Stators/windings, Winding connections

The impact of voltage variation on motor performance

Published: February 2014
Author: Austin Bonnett, Austin Bonnett Engineering, LLC
Technical subject(s): AC motors, Design/theory/application

Why use proper oil viscosity?

Published: February 2014
Technical subject(s): Bearings, Lubrication, Oil lubrication

Working with wrenches

Published: February 2014
Technical subject(s): Safety, Service center equipment

Creative method to remove blind pinion

Published: January 2014
Author: Ron Rapa, Rapa Electric, Inc.
Technical subject(s): Repair procedures and tips, Service center equipment

DC shunt field rewinding wire size considerations

Published: January 2014
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): DC motors, Design/theory/application, Field coils, Repair procedures and tips, Wire

Be on the lookout for safety's sake

Published: December 2013
Technical subject(s): N/A

Potential damage to motor that can result from reclosure

Published: December 2013
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, Stators/windings, Troubleshooting & failure analysis

Pump Failure Case Study

Published: December 2013
Author: Gene Vogel, EASA Pump & Vibration Specialist
Recording duration: 51 minutes
Technical subject(s): Case studies, Pumps, Troubleshooting & failure analysis
CLICK HERE TO PURCHASE

Two potential pitfalls with concentric-to-lap conversions

Published: December 2013
Technical subject(s): Repair procedures and tips, Stators/windings

A balancing act: Knowing and using the correct rotor specifications

Published: November 2013
Author: Gene Vogel, EASA Pump & Vibration Specialist
Technical subject(s): Balancing, Rotors, Vibration

A little tape

Published: November 2013
Technical subject(s): Armatures

Fire prevention tip

Published: November 2013
Technical subject(s): Safety

Vertical Motor Maintenance and Repair

Published: November 2013
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 51 minutes
Technical subject(s): Bearings, Lubrication, Repair procedures and tips
CLICK HERE TO PURCHASE

Easy way to remove stuck end bracket

Published: October 2013
Author: EASA Technical Support Staff
Technical subject(s): Frame, Repair procedures and tips

Evaluating customer requests for warranty repairs

Published: October 2013
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): Repair procedures and tips, Troubleshooting & failure analysis

Pages