Open Search

Resource library

Displaying 161 - 200 of 761

Selección y uso de un Variador de Frecuencia Electrónico para hacer pruebas en un centro de servicios

Published: January 2016
Author: Art Godfrey (retired), Birclar Electric & Electronics
Technical subject(s): AC motors, Drives/controls, Motor testing, Service center equipment

Selection and use of a VFD for service center testing

Published: January 2016
Author: Art Godfrey (retired), Birclar Electric & Electronics
Technical subject(s): AC motors, Drives/controls, Motor testing, Service center equipment

Voltage drop test

Published: January 2016
Technical subject(s): Field coils, Motor testing, Stators/windings

Easy way to determine percent compounding

Published: December 2015
Technical subject(s): DC motors, Design/theory/application, Repair procedures and tips

End-user trends and attitudes about repairing electric motors

Published: December 2015
Author: Jerry Peerbolte, J. Peerbolte & Associates
Technical subject(s): N/A

Making vertical turbine pump shaft adjustments

Published: December 2015
Author: Gene Vogel, EASA Pump & Vibration Specialist
Technical subject(s): Pumps, Repair procedures and tips, Shafts

Partial discharge data collection on VFD motors

Published: December 2015
Author: Ian Culbert, Iris Power-Qualitrol
Technical subject(s): AC motors, Case studies, Drives/controls

Realizando los ajustes en la elevación del eje de una bomba de turbina vertical

Published: December 2015
Author: Gene Vogel, EASA Pump & Vibration Specialist
Technical subject(s): Pumps, Repair procedures and tips, Shafts

Safety Module #4: Lockout/Tagout

Published: December 2015
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety, Service center equipment, Testing

Windings & Connections

Published: December 2015
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 60 minutes
Technical subject(s): AC motors, Design/theory/application, Stators/windings, Winding connections
CLICK HERE TO PURCHASE

ANSI/EASA AR100: What's in the new 2015 edition?

Published: November 2015
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): AC motors, Balancing, Motor testing, Repair procedures and tips, Vibration

DC machine, compounding versatility

Published: November 2015
Technical subject(s): DC motors, Design/theory/application, Repair procedures and tips

Management Pulse Survey results: Ownership transition in an EASA service center

Published: November 2015
Author: Mike Huber, American MTS
Technical subject(s): N/A

Repair or Replace? Research reveals criteria end users consider

Published: November 2015
Author: Jerry Peerbolte, J. Peerbolte & Associates
Technical subject(s): N/A

Safety Module #3: Cranes and slings

Published: November 2015
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety, Service center equipment

Welding and flame cutting reminders

Published: November 2015
Technical subject(s): Safety, Service center equipment

¿Qué es lo nuevo en la edición 2015 de la Norma ANSI/EASA AR 100?

Published: November 2015
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application, Repair procedures and tips, Testing

Plant maintenance strategies provide opportunities for EASAns

Published: October 2015
Author: Jerry Peerbolte, J. Peerbolte & Associates
Technical subject(s): N/A

Recuerde seguir el ABC de la inspección de rodamientos

Published: October 2015
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Ball bearings, Repair procedures and tips, Roller bearings, Troubleshooting & failure analysis

Remember to follow the ABCs of bearing inspection

Published: October 2015
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Ball bearings, Repair procedures and tips, Roller bearings, Troubleshooting & failure analysis

Safety Module #2: Electrical safety

Published: October 2015
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety, Service center equipment

Vibration for Service Centers (12-part webinar series)

Published: October 2015
Author: Gene Vogel, EASA Pump & Vibration Specialist
Recording duration: 15 hours
Technical subject(s): Balancing, Repair procedures and tips, Service center equipment, Testing, Vibration
CLICK HERE TO PURCHASE

Ayuda para las conexiones de rotores bobinados con devanados ondulados de pletina

Published: September 2015
Author: Mike Howell
Technical subject(s): Form wound, Stators/windings

Distancias de las conexiones y las cabezas de bobinas en grandes motores y generadores

Published: September 2015
Author: Richard Huber, P. Eng.
Technical subject(s): AC motors, Alternators/generators, Stators/windings

EASA Accreditation: End-user and motor manufacturer perspectives

Published: September 2015
Author: Jerry Peerbolte
Technical subject(s): N/A

EASA AR100-2015: Práctica Recomendada para la Reparación de Máquinas Eléctricas Rotativas

Published: September 2015
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Stators/windings

End turn and connection spacing in large motors and generators

Published: September 2015
Author: Richard Huber, P. Eng.
Technical subject(s): AC motors, Alternators/generators, Stators/windings

Help with form wound rotor wave connections

Published: September 2015
Author: Mike Howell
Technical subject(s): Form wound, Stators/windings

Management Pulse survey results: Sales compensation and strategy

Published: September 2015
Author: Mike Huber, American MTS
Technical subject(s): N/A

Safety Module #1: Personal protective equipment (PPE)

Published: September 2015
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety, Service center equipment

When a generator will not self-excite

Published: September 2015
Technical subject(s): Alternators/generators

Working with cranes, hoists

Published: September 2015
Technical subject(s): Cranes/hoists, Miscellaneous, Safety, Service center equipment

ANSI/EASA Standard AR100-2015: Recommended Practice for the Repair of Rotating Electrical Apparatus

Published: August 2015
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Stators/windings
CLICK HERE TO PURCHASE

Principles of Medium & Large AC Motors (2nd Edition)

Published: August 2015
Technical subject(s): AC motors, Alignment, Balancing, Bearings, Design/theory/application, Drives/controls, Lubrication, Nameplates, Shafts, Stators/windings, Testing, Vibration, Wire
CLICK HERE TO PURCHASE

Service Factor: What is it and what does it do?

Published: August 2015
Author: Jim Bryan
Technical subject(s): AC motor cooling, AC motors

Tips and Techniques for Winders

Published: August 2015
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 95 minutes (2 recordings)
Technical subject(s): AC motors, Repair procedures and tips, Stators/windings, Winding connections
CLICK HERE TO PURCHASE

Management Pulse survey results: Creative ways to provide "employee perks"

Published: July 2015
Author: Jimmie Williams, Jr., Bradleys', Inc.
Technical subject(s): N/A

Most common methods of balancing overhung rotors

Published: July 2015
Author: Gene Vogel
Technical subject(s): Balancing, Fans, Rotors, Vibration

On-Site Testing & Inspection of Electric Motors

Published: July 2015
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Recording duration: 61 minutes
Technical subject(s): AC motors, Motor testing, Troubleshooting & failure analysis
CLICK HERE TO PURCHASE

Select Presentations 2015

Published: July 2015
Technical subject(s): N/A
CLICK HERE TO PURCHASE

Pages