Open Search

Resource library

Displaying 201 - 240 of 761

Safety precautions when using a torch

Published: June 2015
Technical subject(s): Safety, Service center equipment

Stator Rewinds: When Things Get Tight

Published: June 2015
Author: Mike Howell, EASA Technical Support Specialist
Recording duration: 60 minutes
Technical subject(s): AC motors, Design/theory/application, Repair procedures and tips, Stators/windings, Winding insulation, Wire
CLICK HERE TO PURCHASE

Use of the "double delta" connection

Published: June 2015
Technical subject(s): Winding connections

V-belt drives: Common problems and their solutions

Published: June 2015
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): Alignment, Bearings, Shafts, Sheaves/pulleys/belting, Troubleshooting & failure analysis

Finding industry research and how to put it to good use

Published: May 2015
Author: Paul Rossiter, Energy Management Corp.
Technical subject(s): N/A

Job Descriptions for EASA Service Centers

Published: May 2015
Technical subject(s): N/A

Management Pulse survey results: Corporate compliance, performance and disciplinary actions

Published: May 2015
Author: Janet Schmidlkofer, K&N Electric Motors, Inc.
Technical subject(s): N/A

Simple procedure to degauss a shaft

Published: May 2015
Technical subject(s): Armatures, Repair procedures and tips, Rotors, Service center equipment

The effect of rotor skew, cusp and cogging on motor startup

Published: May 2015
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Design/theory/application, Rotor bar shapes, Rotors, Stators/windings

Troubleshooting AC Generators and Alternators

Published: May 2015
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 60 minutes
Technical subject(s): Alternators/generators, Design/theory/application, Stators/windings, Testing
CLICK HERE TO PURCHASE

Workplace safety: First rule to remember

Published: May 2015
Technical subject(s): N/A

Assessing Impeller Damage

Published: April 2015
Author: Gene Vogel, EASA Pump & Vibration Specialist
Recording duration: 54 minutes
Technical subject(s): Pumps, Troubleshooting & failure analysis
CLICK HERE TO PURCHASE

Combination tables for round magnet wire changes

Published: April 2015
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): Design/theory/application, Stators/windings, Wire

Induction motor application guidelines for AC variable frequency drives

Published: April 2015
Author: Art Godfrey (retired), Birclar Electric & Electronics
Technical subject(s): AC motors, Drives/controls

U.S. Motor Efficiency Regulation Update

Published: April 2015
Author: Rob Boteler, Nidec Motor Corp.
Author: John Malinowski, Baldor Electric Co.
Recording duration: 48 minutes
Technical subject(s): AC motors, Miscellaneous

Want to be successful? Consider joining an RCE group

Published: April 2015
Author: Dale Hamil, Illinois Electric Works
Technical subject(s): N/A

Keeping it cool: A look at causes of motor overheating

Published: March 2015
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, DC motor enclosures, DC motors, Design/theory/application, Frame, Laminations, Ventilation/cooling, Winding insulation

Management Pulse survey results: Employees, company image, project management and templates

Published: March 2015
Author: Lenwood Ireland, Ireland Electric Co.
Technical subject(s): N/A

Proper Motor Cleaning: Avoiding Damage to the Motor and the Environment

Published: March 2015
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Recording duration: 61 minutes
Technical subject(s): AC motors, DC motors, Frame, Repair procedures and tips, Safety, Service center equipment
CLICK HERE TO PURCHASE

Tips for motors with air baffles

Published: March 2015
Technical subject(s): AC motor enclosures, Repair procedures and tips, Ventilation/cooling

Finding correct replacement thermals

Published: February 2015
Author: EASA
Technical subject(s): Miscellaneous, Repair procedures and tips

Guidelines for vertical pump removal and installation

Published: February 2015
Author: Eugene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Pump testing, Pumps, Repair procedures and tips

Identifying and getting to root cause of shaft currents

Published: February 2015
Author: By Pat Douglas Kirby Risk, Mechanical Solutions & Service
Technical subject(s): AC motors, Drives/controls, Shafts, Troubleshooting & failure analysis

Reclosure: How it Happens and What To Do About It

Published: February 2015
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 45 minutes
Technical subject(s): AC motors, Design/theory/application, Stators/windings, Troubleshooting & failure analysis
CLICK HERE TO PURCHASE

Special care with abrasive blasting

Published: February 2015
Author: EASA
Technical subject(s): Miscellaneous, Repair procedures and tips, Safety, Service center equipment

AC Motor Redesign: Speed Changes

Published: January 2015
Author: Mike Howell, EASA Technical Support Specialist
Recording duration: 55 minutes
Technical subject(s): AC motors, Design/theory/application, Stators/windings
CLICK HERE TO PURCHASE

Care with commutator clamping bolts

Published: January 2015
Technical subject(s): Commutators

Management Pulse survey results: Employee training

Published: January 2015
Author: Syndy Thrash, Evans Enterprises, Inc.
Technical subject(s): N/A

Preventive and predictive maintenance of electric motors

Published: January 2015
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): Alignment, Testing, Vibration

Working with cranes, forklifts

Published: January 2015
Technical subject(s): Cranes/hoists, Safety, Service center equipment

Considerations when working with compound wound DC fields

Published: December 2014
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Design/theory/application, Field coils

Measuring bearing journals

Published: December 2014
Technical subject(s): Bearings, Service center equipment

OSHA issues new accident and fatality reporting rules

Published: December 2014
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): N/A

Safety Concerns: Electrical Safety, Lockout/Tagout, Arc Flash

Published: December 2014
Author: Tom Barnes, Compliance Specialists, Inc.
Recording duration: 64 minutes
Technical subject(s): Safety, Service center equipment
CLICK HERE TO PURCHASE

A closer look at accuracy of measuring and test equipment

Published: November 2014
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): Service center equipment, Testing

Final Testing for Pumps - An Overview

Published: November 2014
Author: Gene Vogel, EASA Pump & Vibration Specialist
Recording duration: 62 minutes
Technical subject(s): Pump seals, Pump testing
CLICK HERE TO PURCHASE

Testing methods for induction motors for use in VFD-powered applications

Published: November 2014
Author: Art Godfrey (retired), Birclar Electric & Electronics
Technical subject(s): AC motors, Motor testing

Testing of fan motors with the fan installed

Published: November 2014
Technical subject(s): AC motors, Fans, Motor testing, Ventilation/cooling

Factors to consider when installing blowers on DC machines

Published: October 2014
Technical subject(s): DC motor cooling, DC motors, Ventilation/cooling

Management Pulse survey results: Healthcare and other benefits

Published: October 2014
Author: Martha Meza-Lara, Bellwood Electric Motors, Inc.
Technical subject(s): N/A

Pages