Open Search

Resource library

Displaying 181 - 210 of 761

Safety Module #2: Electrical safety

Published: October 2015
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety, Service center equipment

Vibration for Service Centers (12-part webinar series)

Published: October 2015
Author: Gene Vogel, EASA Pump & Vibration Specialist
Recording duration: 15 hours
Technical subject(s): Balancing, Repair procedures and tips, Service center equipment, Testing, Vibration
CLICK HERE TO PURCHASE

Ayuda para las conexiones de rotores bobinados con devanados ondulados de pletina

Published: September 2015
Author: Mike Howell
Technical subject(s): Form wound, Stators/windings

Distancias de las conexiones y las cabezas de bobinas en grandes motores y generadores

Published: September 2015
Author: Richard Huber, P. Eng.
Technical subject(s): AC motors, Alternators/generators, Stators/windings

EASA Accreditation: End-user and motor manufacturer perspectives

Published: September 2015
Author: Jerry Peerbolte
Technical subject(s): N/A

EASA AR100-2015: Práctica Recomendada para la Reparación de Máquinas Eléctricas Rotativas

Published: September 2015
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Stators/windings

End turn and connection spacing in large motors and generators

Published: September 2015
Author: Richard Huber, P. Eng.
Technical subject(s): AC motors, Alternators/generators, Stators/windings

Help with form wound rotor wave connections

Published: September 2015
Author: Mike Howell
Technical subject(s): Form wound, Stators/windings

Management Pulse survey results: Sales compensation and strategy

Published: September 2015
Author: Mike Huber, American MTS
Technical subject(s): N/A

Safety Module #1: Personal protective equipment (PPE)

Published: September 2015
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety, Service center equipment

When a generator will not self-excite

Published: September 2015
Technical subject(s): Alternators/generators

Working with cranes, hoists

Published: September 2015
Technical subject(s): Cranes/hoists, Miscellaneous, Safety, Service center equipment

ANSI/EASA Standard AR100-2015: Recommended Practice for the Repair of Rotating Electrical Apparatus

Published: August 2015
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Stators/windings
CLICK HERE TO PURCHASE

Principles of Medium & Large AC Motors (2nd Edition)

Published: August 2015
Technical subject(s): AC motors, Alignment, Balancing, Bearings, Design/theory/application, Drives/controls, Lubrication, Nameplates, Shafts, Stators/windings, Testing, Vibration, Wire
CLICK HERE TO PURCHASE

Service Factor: What is it and what does it do?

Published: August 2015
Author: Jim Bryan
Technical subject(s): AC motor cooling, AC motors

Tips and Techniques for Winders

Published: August 2015
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 95 minutes (2 recordings)
Technical subject(s): AC motors, Repair procedures and tips, Stators/windings, Winding connections
CLICK HERE TO PURCHASE

Management Pulse survey results: Creative ways to provide "employee perks"

Published: July 2015
Author: Jimmie Williams, Jr., Bradleys', Inc.
Technical subject(s): N/A

Most common methods of balancing overhung rotors

Published: July 2015
Author: Gene Vogel
Technical subject(s): Balancing, Fans, Rotors, Vibration

On-Site Testing & Inspection of Electric Motors

Published: July 2015
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Recording duration: 61 minutes
Technical subject(s): AC motors, Motor testing, Troubleshooting & failure analysis
CLICK HERE TO PURCHASE

Select Presentations 2015

Published: July 2015
Technical subject(s): N/A
CLICK HERE TO PURCHASE

Safety precautions when using a torch

Published: June 2015
Technical subject(s): Safety, Service center equipment

Stator Rewinds: When Things Get Tight

Published: June 2015
Author: Mike Howell, EASA Technical Support Specialist
Recording duration: 60 minutes
Technical subject(s): AC motors, Design/theory/application, Repair procedures and tips, Stators/windings, Winding insulation, Wire
CLICK HERE TO PURCHASE

Use of the "double delta" connection

Published: June 2015
Technical subject(s): Winding connections

V-belt drives: Common problems and their solutions

Published: June 2015
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): Alignment, Bearings, Shafts, Sheaves/pulleys/belting, Troubleshooting & failure analysis

Finding industry research and how to put it to good use

Published: May 2015
Author: Paul Rossiter, Energy Management Corp.
Technical subject(s): N/A

Job Descriptions for EASA Service Centers

Published: May 2015
Technical subject(s): N/A

Management Pulse survey results: Corporate compliance, performance and disciplinary actions

Published: May 2015
Author: Janet Schmidlkofer, K&N Electric Motors, Inc.
Technical subject(s): N/A

Simple procedure to degauss a shaft

Published: May 2015
Technical subject(s): Armatures, Repair procedures and tips, Rotors, Service center equipment

The effect of rotor skew, cusp and cogging on motor startup

Published: May 2015
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Design/theory/application, Rotor bar shapes, Rotors, Stators/windings

Troubleshooting AC Generators and Alternators

Published: May 2015
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 60 minutes
Technical subject(s): Alternators/generators, Design/theory/application, Stators/windings, Testing
CLICK HERE TO PURCHASE

Pages