Open Search

Resource library

Displaying 241 - 280 of 761

Motor terminal box connection methods and procedures

Published: October 2014
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, DC motors, Terminal boxes (outlet boxes)

Safely using hydraulic and mechanical jacks and pullers

Published: October 2014
Technical subject(s): Service center equipment

Squirrel Cage Rotor Testing

Published: October 2014
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 42 minutes
Technical subject(s): Motor testing, Rotors
CLICK HERE TO PURCHASE

Concentric or Lap? Considerations for the 2-Pole Stator Rewind

Published: September 2014
Author: Mike Howell, EASA Technical Support Specialist
Recording duration: 57 minutes
Technical subject(s): Design/theory/application, Repair procedures and tips, Stators/windings
CLICK HERE TO PURCHASE

Effect of wire area on interpoles and series fields

Published: September 2014
Technical subject(s): Field coils, Interpoles, Wire

Tight vibration specification for electric motors: Effective or just expensive?

Published: September 2014
Author: Gene Vogel, EASA Pump & Vibration Specialist
Technical subject(s): Vibration

Watch those hands in the machine shop

Published: September 2014
Technical subject(s): Safety, Service center equipment

Avoid injuries when lifting

Published: August 2014
Technical subject(s): Safety

Cautions with segmented laminations

Published: August 2014
Technical subject(s): Laminations

External mechanical tolerances for electric motors and generators

Published: August 2014
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): AC motors, Alternators/generators, Base/soleplate/foundation, Bearings, Frame, Repair procedures and tips, Shafts

Management Pulse survey results: Replacing management personnel

Published: August 2014
Author: Charles Bailey, EASA Management Services Committee
Technical subject(s): N/A

Time-Saving Repair Tips

Published: August 2014
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 59 minutes
Technical subject(s): Miscellaneous, Repair procedures and tips, Service center equipment
CLICK HERE TO PURCHASE

Armature winding designs demystified with helpful tips

Published: July 2014
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Armatures, Design/theory/application

Winding insulation when room is limited

Published: July 2014
Technical subject(s): Winding insulation

Considerations for insulated bearings

Published: June 2014
Technical subject(s): Bearings, Repair procedures and tips

Ensuring Success with VPI

Published: June 2014
Author: Mike Howell, EASA Technical Support Specialist
Recording duration: 63 minutes
Technical subject(s): Repair procedures and tips, Stators/windings, Winding insulation
CLICK HERE TO PURCHASE

Environmental audit questionnaire

Published: June 2014
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety, Service center equipment

Exclusive Industry Research

Published: June 2014
Author: CFE Media
Technical subject(s): N/A

Important considerations for on-site stator rewinds

Published: June 2014
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): AC motors, Stators/windings

Management Pulse survey results: Return to Work programs and procedures

Published: June 2014
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): N/A

Revised Energy Conservation Standards for Commercial and Industrial Electric Motors released by U.S. DOE

Published: June 2014
Author: Rob Boteler, Chair, NEMA Energy Management Committee, Nidec Government Affairs
Technical subject(s): N/A

Safety and health audit questionnaire

Published: June 2014
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety

Safety with mobile equipment

Published: June 2014
Technical subject(s): Safety, Service center equipment

The importance of stator core loss testing before and after burn-off process

Published: June 2014
Author: Steve Skenzick, HPS Electrical Apparatus Sales & Service
Technical subject(s): AC motors, Case studies, Laminations, Motor testing, Repair procedures and tips, Service center equipment, Stators/windings

Properly evaluating shunt field amps versus ohms

Published: May 2014
Technical subject(s): Alternators/generators, DC motors, Design/theory/application, Field coils

Safe starting of motors: Pay attention to temperature increase

Published: May 2014
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application

Safety with portable grinders

Published: May 2014
Technical subject(s): Safety, Service center equipment

Special sensors detect mixture of water and oil in pumps

Published: May 2014
Author: Bret McCormick, Stewart's Electric Motor Works, Inc.
Technical subject(s): Miscellaneous, Pumps

Winding & Bearing Temperature Sensing Devices

Published: May 2014
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 56 minutes
Technical subject(s): AC motors, Bearings, Stators/windings, Temperature detectors
CLICK HERE TO PURCHASE

Choosing between "component" and "cartridge" mechanical seals

Published: April 2014
Author: Gene Vogel, EASA Pump & Vibration Specialist
Technical subject(s): Design/theory/application, Pump seals, Pumps

Core Repair and Restack Techniques

Published: April 2014
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 63 minutes
Technical subject(s): Repair procedures and tips, Stators/windings
CLICK HERE TO PURCHASE

Management Pulse survey results: Accounting Information Systems

Published: April 2014
Author: Steve Rossiter, Energy Management Corp.
Technical subject(s): N/A

Potting submersible pump cables

Published: April 2014
Technical subject(s): Pumps, Repair procedures and tips

Pump Selection (3-Part Series)

Published: April 2014
Author: Gene Vogel, EASA Pump & Vibration Specialist
Recording duration: 2 hours 44 minutes
Technical subject(s): Design/theory/application, Pumps
CLICK HERE TO PURCHASE

Some general rules for safety

Published: April 2014
Technical subject(s): Safety

Transformer basics: How they operate, their many features

Published: April 2014
Author: Richard Huber, P. Eng., Richard Huber Engineering, Ltd.
Technical subject(s): Design/theory/application, Transformers

Make sure design is “Suitable for Use”

Published: March 2014
Technical subject(s): Design/theory/application

Motor Starting Capabilities and Considerations

Published: March 2014
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Recording duration: 59 minutes
Technical subject(s): AC motors, Design/theory/application
CLICK HERE TO PURCHASE

The importance of calibration in the service center

Published: March 2014
Author: Pat Douglas, Kirby Risk-Mechanical Solutions and Service
Technical subject(s): Service center equipment

Thermistors: What they are and how they work

Published: March 2014
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): Miscellaneous, Stators/windings, Temperature detectors

Pages