Open Search

Download documents supporting EASA's Accreditation Program

The criteria for the EASA Accreditation Program are based on the good practices found in ANSI/EASA AR-100: Recommended Practice for the Repair of Rotating Electrical Apparatus and The Good Practice Guide of The Effect of Repair/Rewinding on Motor Efficiency. Service centers wishing to become accredited should download, review and become familiar with these publications.

The EASA Accreditation Program utilizes a checklist consisting of 23 categories for more than 70 mandatory criteria elements. The auditor evaluates each criteria line item for evidence of conformity by review of applicable service center repair documents or by observation of service center practices. Review of the calibration status of associated equipment is also performed by the auditor. (Note: Calibration requirements apply to all instruments included in the required equipment list. However, instruments not in the required equipment list are not required to be calibrated because they are outside the scope of the program.)

Use the links below to download the documents needed to become an EASA Accredited service center.

ANSI/EASA AR100-2015: Recommended Practice for the Repair of Rotating Electrical Apparatus


  1. ANSI/EASA AR100-2015: Recommended Practice for the Repair of Rotating Electrical Apparatus - English | Spanish
  2. ​Audit Checklist (Ver. 2) - English | Spanish
  3. Audit Checklist with Explanations (Ver. 2) - English | Spanish

For your reference, the links below highlight changes made between the 2010 and 2015 versions.

Additional supporting documents

The documents shown below may also be helpful in preparing for your service center's internal and external audits. Click on the links to view/download the PDFs.

The Effect of Repair/Rewinding on Motor Efficiency
(See the Good Practice Guide)

El Efecto de la Reparación/Rebobinado en la Eficiencia del Motor