Open Search

Resource library

Displaying 1 - 15 of 153

Possible cause of failure in high-speed winding

Published: June 2018
Technical subject(s): Cranes/hoists, Stators/windings, Troubleshooting & failure analysis
[field_resource_store_link_member]

Safety tips for personal and respiratory protection

Published: May 2018
Technical subject(s): Safety, Service center equipment
[field_resource_store_link_member]

Tech Tip: Estimating copper weight

Published: May 2018
Technical subject(s): Repair procedures and tips, Stators/windings, Wire
[field_resource_store_link_member]

Safety Tips: Machinery cautions

Published: April 2018
Technical subject(s): Safety, Service center equipment
[field_resource_store_link_member]

Tech Tip: Submersibles – oil filled stator?

Published: April 2018
Technical subject(s): Lubrication, Stators/windings
[field_resource_store_link_member]

Safety Tips: Rules for the machine shop

Published: March 2018
Technical subject(s): Safety, Service center equipment
[field_resource_store_link_member]

Tech Tip: Consider cost when selecting pump seal

Published: March 2018
Technical subject(s): Pump seals, Pumps
[field_resource_store_link_member]

General rules and precautions when using grinders

Published: January 2018
Technical subject(s): Safety, Service center equipment
[field_resource_store_link_member]

Interpreting results of armature surge test

Published: January 2018
Technical subject(s): Armatures, Motor testing
[field_resource_store_link_member]

Effect of adjustable speed drive carrier frequency on bearing current

Published: December 2017
Technical subject(s): AC motors, Design/theory/application, Drives/controls
[field_resource_store_link_member]

Tech Tip: Key points when performing stator core loop test

Published: November 2017
Technical subject(s): Laminations, Motor testing, Stators/windings, Winding insulation
[field_resource_store_link_member]

Troubleshooting DC field temperature issues

Published: October 2017
Technical subject(s): DC motor cooling, Field coils, Nameplates, Repair procedures and tips, Ventilation/cooling
[field_resource_store_link_member]

Burnout oven calibration

Published: August 2017
Technical subject(s): Repair procedures and tips, Service center equipment
[field_resource_store_link_member]

Rotor bar pass frequencies

Published: June 2017
Technical subject(s): Motor testing, Rotors, Vibration
[field_resource_store_link_member]

Tech Tip: Novel method for packing a bearing with grease

Published: April 2017
Author: Bret McCormick, Stewart’s Electric Motor Works, Inc., Orlando, Florida, Technical Education Committee Member
Technical subject(s): Bearings, Grease lubrication, Lubrication
[field_resource_store_link_member]

Pages