Open Search

Resource library

Displaying 16 - 30 of 35

Dépannage sur place d’un moteur à courant continu

Published: October 2003
Technical subject(s): DC motors, Troubleshooting & failure analysis
[field_resource_store_link_member]

Directives pour maintenir le rendement d’un moteur durant sa remise en état

Published: October 2003
Technical subject(s): AC motors, Laminations, Motor testing, Repair procedures and tips, Stators/windings
[field_resource_store_link_member]

Données relatives aux fils de bobinage circulaires

Published: October 2003
Technical subject(s): Wire
[field_resource_store_link_member]

Essai des rotors à cage d’écureuil

Published: October 2003
Technical subject(s): AC motors, Cast rotors, Fabricated rotors, Motor testing, Rotors
[field_resource_store_link_member]

Facteurs à considérer pour l’utilisation d’inverseurs à modulation d’impulsions en durée et de moteurs ca à induction à l’intérieur d’un système complet

Published: October 2003
Author: Austin Bonnett, EASA Education & Technology Consultant
Technical subject(s): AC motors, Design/theory/application, Drives/controls
[field_resource_store_link_member]

Facteurs de conversion de bobinage concentique á bobinage imbriqué

Published: October 2003
Technical subject(s): AC motors, Stators/windings, Winding connections
[field_resource_store_link_member]

Installation de bandes de fibre de verre pré-imprégnées sur un induit

Published: October 2003
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Armatures, Repair procedures and tips
[field_resource_store_link_member]

La fabrication d’arbres de rechange pour moteurs électriques

Published: October 2003
Author: E. Steve Darby (deceased), Darby Electric Co.
Technical subject(s): Repair procedures and tips, Shafts
[field_resource_store_link_member]

Le rebobinage de moteurs EVV

Published: October 2003
Author: Richard Huber, P. Eng., Richard Huber Engineering, Ltd.
Technical subject(s): AC motors, Drives/controls, Repair procedures and tips
[field_resource_store_link_member]

Les enroulements intercalaires: que sont-ils?

Published: October 2003
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application, Stators/windings, Winding connections
[field_resource_store_link_member]

Lubrification des roulements des machines électriques

Published: October 2003
Technical subject(s): Ball bearings, Grease lubrication, Lubrication, Lubrication compatibility, Oil lubrication, Roller bearings
[field_resource_store_link_member]

Normes relatives à l’équilibrage dynamique

Published: October 2003
Author: John Harrell, On-Site Training Services
Technical subject(s): Balancing
[field_resource_store_link_member]

Paliers de butée antifriction pour moteurs verticaux

Published: October 2003
Author: Austin Bonnett, EASA Education & Technology Consultant
Technical subject(s): AC motors, Bearings, Repair procedures and tips
[field_resource_store_link_member]

Porte-balais (ou supports) et performances des balais de carbone (ou brosses)

Published: October 2003
Author: Jeff D. Koenitzer, P.E., Helwig Carbon Products, Inc.
Technical subject(s): Brushes, DC motors, Design/theory/application
[field_resource_store_link_member]

Procédés de vérification des jeux axiaux dans les dispositifs à roulements

Published: October 2003
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Ball bearings, Repair procedures and tips, Testing
[field_resource_store_link_member]

Pages