Open Search

Resource library

Displaying 1 - 30 of 812

The Effect of Repair/Rewinding on Motor Efficiency: EASA/AEMT Rewind Study and Good Practice Guide to Maintain Motor Efficiency

Published: December 2003
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Service center equipment

Bobinados de campo de baja resistencia en motores de CC-Aplicación y pruebas

Published: September 2018
Author: Chase Fell, Precision Coil and Rotor
Technical subject(s): DC motors, Motor testing, Testing

Converting motors from horizontal to vertical mount

Published: September 2018
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): Alignment, Bearings, Design/theory/application, Frame, Lubrication, Miscellaneous, Rotors, Shafts

Convirtiendo motores de montaje horizontal a vertical

Published: September 2018
Author: Por Tom Bishop, P.E. Especialista Sénior de Soporte Técnico de EASA
Technical subject(s): Alignment, Bearings, Design/theory/application, Frame, Lubrication, Miscellaneous, Rotors, Shafts

Low-resistance fields in DC motors; application and testing

Published: September 2018
Author: Chase Fell, Precision Coil and Rotor
Technical subject(s): DC motors, Motor testing, Testing

Safety Tips: The “eyes” have it: Tips to protect your eyes from hazards in the service center

Published: September 2018
Technical subject(s): Safety

September survey will focus on safety analysis and work instructions

Published: September 2018
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety

Tech Tip: VFDs sitting around?

Published: September 2018
Technical subject(s): Drives/controls

AC Motor Assembly and Testing

Published: August 2018
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Recording duration: 60
Technical subject(s): AC motors, Motor testing, Testing

Safety: What is unique about an electric motor service facility?

Published: August 2018
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Safety, Service center equipment

Seguridad: ¿Qué tiene de especial un centro de servicio de motores eléctricos?

Published: August 2018
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): Safety, Service center equipment

ANSI's New Shaft Alignment Standard

Published: July 2018
Author: Gene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Pumps, Shafts

Safety Tips: Summer precautions

Published: July 2018
Technical subject(s): Safety

Tech Tip: Magnetic wedges

Published: July 2018
Technical subject(s): Stators/windings

Trabajando con bobinados con espiras diferentes (impares)

Published: July 2018
Author: Por Mike Howell Especialista de Soporte Técnico de EASA
Technical subject(s): Random wound, Winding connections

Working with odd-turn (unequal-turn) windings

Published: July 2018
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): Random wound, Winding connections

Dos ejemplos de casos que indican la necesidad de tener cuidado con el metalizado

Published: June 2018
Author: Steve Skenzick, HPS Electrical Apparatus Sales & Service
Technical subject(s): Repair procedures and tips, Safety, Service center equipment, Shafts

Management Pulse Survey results: Focus on sexual harassment in the workplace

Published: June 2018
Author: Stan Martindell, Topeka Electric Motor Repair, Inc.
Technical subject(s): N/A

Possible cause of failure in high-speed winding

Published: June 2018
Technical subject(s): Cranes/hoists, Stators/windings, Troubleshooting & failure analysis

Preparándose para el nuevo enfoque en bombas y sistemas de bombeo

Published: June 2018
Author: Gene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Design/theory/application, Pumps

Preparing for the new focus on pumps and pump systems

Published: June 2018
Author: Gene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Design/theory/application, Pumps

Select Presentions 2018

Published: June 2018
Technical subject(s): N/A

Two case history examples point to need for caution with metal spray

Published: June 2018
Author: Steve Skenzick, HPS Electrical Apparatus Sales & Service
Technical subject(s): Repair procedures and tips, Safety, Service center equipment, Shafts

Wire Size Changes 101: Tools and Methods for Avoiding Costly Mistakes with the Most Common Redesign

Published: June 2018
Author: Mike Howell, EASA Technical Support Specialist
Recording duration: 58 Minutes
Technical subject(s): Repair procedures and tips, Stators/windings, Wire

A closer look at winding conversions by reconnection

Published: May 2018
Author: Tom Bishop, EASA Senior Technical Support Specialist
Technical subject(s): AC motors, Repair procedures and tips, Stators/windings, Winding connections

Safety tips for personal and respiratory protection

Published: May 2018
Technical subject(s): Safety, Service center equipment

Tech Tip: Estimating copper weight

Published: May 2018
Technical subject(s): Repair procedures and tips, Stators/windings, Wire

Una mirada más detallada a las conversiones de bobinados por reconexión

Published: May 2018
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): AC motors, Repair procedures and tips, Stators/windings, Winding connections

Using Variable-Speed Drives to Improve Pump System Efficiency

Published: May 2018
Author: Gene Vogel, EASA Pump and Vibration Specialist
Recording duration: 60 Minutes
Technical subject(s): Pumps

Advanced rotor bar testing with surface magnetic field measurements

Published: April 2018
Author: Scott W. Clark, Ph.D., P.E., Brandon & Clark, Inc.
Technical subject(s): Rotors, Testing

Pages