Open Search

Resource library

Displaying 1 - 50 of 728

EASA Technical Manual

Published: August 2016
Technical subject(s): AC motors, DC motors, Design/theory/application, Drives/controls, Frame, Lubrication, Miscellaneous, Nameplates, Repair procedures and tips, Safety, Servo motors, Shafts, Testing, Transformers, Ventilation/cooling, Vibration, Wire

EASA AR100-2015: Práctica Recomendada para la Reparación de Máquinas Eléctricas Rotativas

Published: September 2015
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Stators/windings

ANSI/EASA Standard AR100-2015: Recommended Practice for the Repair of Rotating Electrical Apparatus

Published: August 2015
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Stators/windings
CLICK HERE TO PURCHASE

EASA Technical Manual (Deutsche)

Published: November 2012
Technical subject(s): AC motors, DC motors, Design/theory/application, Drives/controls, Frame, Lubrication, Miscellaneous, Nameplates, Repair procedures and tips, Safety, Servo motors, Shafts, Testing, Transformers, Ventilation/cooling, Vibration, Wire

The Effect of Repair/Rewinding on Motor Efficiency: EASA/AEMT Rewind Study and Good Practice Guide to Maintain Motor Efficiency

Published: December 2003
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Service center equipment
CLICK HERE TO PURCHASE

A low-cost core test setup for small stators

Published: May 2017
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Service center equipment, Stators/windings

Management Pulse: Employee drug testing policies in the workplace

Published: May 2017
Author: Tom Barnes, Compliance Specialists
Technical subject(s): N/A

Troubleshooting Pump Performance Problems

Published: May 2017
Author: Gene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Pump testing, Pumps, Repair procedures and tips
CLICK HERE TO PURCHASE

Una configuración económica para la prueba de núcleos de estatores pequeños

Published: May 2017
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): AC motors, Motor testing, Repair procedures and tips, Service center equipment, Stators/windings

Aprovechando al máximo la prueba de factor de potencia tip-up

Published: April 2017
Author: Chase Fell, Precision Coil and Rotor
Technical subject(s): AC motors, Alternators/generators, Motor testing, Winding insulation

Getting the most from power factor tip-up testing

Published: April 2017
Author: Chase Fell, Precision Coil and Rotor
Technical subject(s): AC motors, Alternators/generators, Motor testing, Winding insulation

Información necesaria para completar la solicitud de verificación de datos & rediseño

Published: April 2017
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application, Repair procedures and tips, Stators/windings, Winding connections

Information that's needed to complete a data verification & redesign request

Published: April 2017
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): AC motors, Design/theory/application, Repair procedures and tips, Winding connections

Stator Core Testing: Know What You Have Before You Wind It

Published: April 2017
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): Form wound, Motor testing, Stators/windings, Testing
CLICK HERE TO PURCHASE

Tech Tip: Novel method for packing a bearing with grease

Published: April 2017
Author: Bret McCormick, Stewart’s Electric Motor Works, Inc., Orlando, Florida, Technical Education Committee Member
Technical subject(s): Bearings, Grease lubrication, Lubrication

Tech Tips: Tips for motor paint

Published: April 2017
Technical subject(s): Miscellaneous, Repair procedures and tips

Consider this aluminum frame motor burnout method

Published: March 2017
Author: Jacob Snyder, Evans Enterprises, Inc., Tulsa, OK.
Technical subject(s): Repair procedures and tips, Service center equipment

Considere este método para quemar un motor con carcasa de aluminio

Published: March 2017
Author: Jacob Snyder, Evans Enterprises, Inc., Tulsa, OK.
Technical subject(s): Repair procedures and tips, Service center equipment

Projectos simplificados por una mejor comprensión de los ratios y proporciones

Published: March 2017
Author: Gene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Miscellaneous

Projects simplified with better understanding of ratios and proportions

Published: March 2017
Author: Gene Vogel, EASA Pump and Vibration Specialist
Technical subject(s): Miscellaneous

Safety Tips: Remember these general rules

Published: March 2017
Technical subject(s): Miscellaneous, Safety

Speed/Torque Curves

Published: March 2017
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 56 Minutes
Technical subject(s): Troubleshooting & failure analysis
CLICK HERE TO PURCHASE

Tech Tip: When restacking, use real coreplate

Published: March 2017
Technical subject(s): Repair procedures and tips

DC Theory and Design 101

Published: February 2017
Author: Chuck Yung, EASA Senior Technical Support Specialist
Recording duration: 60 Minutes
Technical subject(s): DC motors, Design/theory/application
CLICK HERE TO PURCHASE

Getting the most from your call to EASA Technical Support

Published: February 2017
Author: Mike Parsons, Hupp Electric Motors Co., Marion, Iowa, Technical Education Committee Member
Technical subject(s): Miscellaneous, Repair procedures and tips

How To Wind Three-Phase Stators (Version 2)

Published: February 2017
Technical subject(s): AC motors, Dip & bake, Lacing/bracing, Laminations, Motor testing, Nameplates, Random wound, Repair procedures and tips, Service center equipment, Stators/windings, Training, Ventilation/cooling, VPI, Winding connections, Winding insulation, Wire
CLICK HERE TO PURCHASE

Methods for three-phase winding data verification

Published: February 2017
Author: Tom Bishop, P.E., EASA Senior Technical Support Specialist
Technical subject(s): Stators/windings, Winding connections

Métodos para verificar los datos de un bobinado trifásico

Published: February 2017
Author: Por Tom Bishop, P.E. Especialista de Soporte Técnico de EASA
Technical subject(s): Testing

Simple tips for important electrical tests

Published: February 2017
Technical subject(s): AC motors, Motor testing, Stators/windings

Auxiliary cooling of electric motors (and other equipment)

Published: January 2017
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): AC motor cooling, AC motors, DC motor cooling, DC motors, Miscellaneous, Ventilation/cooling

Off-the-job safety

Published: January 2017
Technical subject(s): Safety

Refrigeración auxiliar de motores eléctricos (y otros equipos)

Published: January 2017
Author: Chuck Yung, EASA Senior Technical Support Specialist
Technical subject(s): AC motors, DC motor cooling, DC motors, Miscellaneous, Ventilation/cooling

Unequal grouping sequences for 
1-4 vs. 1-7 jumpers

Published: January 2017
Technical subject(s): Stators/windings

Waste Minimization Program

Published: January 2017
Technical subject(s): N/A

Another use for copper tubing

Published: December 2016
Technical subject(s): Miscellaneous, Winding connections

Niveles para la prueba de impulso en estatores de pletina

Published: December 2016
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): Motor testing, Stators/windings

Safety Module #16: DOT, hazardous material shipping

Published: December 2016
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Miscellaneous, Safety, Service center equipment, Training

Surge test levels for form wound stators

Published: December 2016
Author: Mike Howell, EASA Technical Support Specialist
Technical subject(s): Motor testing, Stators/windings, Testing

The Basics: What You Should Know about Pump Cavitation

Published: December 2016
Author: Gene Vogel, EASA Pump & Vibration Specialist
Recording duration: 61 minutes
Technical subject(s): Design/theory/application, Pumps, Troubleshooting & failure analysis
CLICK HERE TO PURCHASE

Bearing basics: Purpose, design features of common elements

Published: November 2016
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): Bearings, Design/theory/application

EASA Warranty Report Forms

Published: November 2016
Technical subject(s): Miscellaneous, Repair procedures and tips

Fundamentos de los rodamientos: Propósito y características de diseño de los elementos más comunes

Published: November 2016
Author: Jim Bryan, EASA Technical Support Specialist
Technical subject(s): Bearings, Design/theory/application

Safety Module #15: Hazardous waste management

Published: November 2016
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety

The Basics: Motor Connections

Published: November 2016
Author: Jim Bryan, EASA Technical Support Specialist
Recording duration: 64 Minutes
Technical subject(s): AC motors, Winding connections
CLICK HERE TO PURCHASE

Electric Motors: Repair or Replace? sales/marketing PowerPoint tool

Published: October 2016
Technical subject(s): AC motors, DC motors, Design/theory/application, Repair procedures and tips, Troubleshooting & failure analysis

Funciones que ahorran tiempo incluidas en el programa actualizado de Verificación & Rediseño de Motores C.A.

Published: October 2016
Author: Gene Vogel Especialista de Bombas y Vibraciones de EASA
Technical subject(s): AC motors, Stators/windings

Looking back at major winding refurbishment and upgrade

Published: October 2016
Author: John Allen, Sheppard Engineering, Birmingham, UK
Technical subject(s): Alternators/generators, Case studies, DC motors, Stators/windings

Management Pulse Survey results: Workplace policies

Published: October 2016
Author: Paul Idziak, Shermco Industries, Inc.
Technical subject(s): N/A

Recapitulando el reacondicionamiento y las mejoras realizadas en un gran bobinado

Published: October 2016
Author: John Allen, Sheppard Engineering, Birmingham, UK
Technical subject(s): DC motors, Rotors, Stators/windings

Safety Module #14: Bloodborne pathogens

Published: October 2016
Author: Tom Barnes, Compliance Specialists, Inc.
Technical subject(s): Safety

Pages